Raspberry Pi OS Software Packages

Raspberry Pi OS is the offical operating system of the Raspberry Pi (previously known as Raspbian). Though not the only Operarting Systems the Raspberry Pi can use, it is the one that has the setup and software managed by the Raspberry Pi foundation. Raspberry Pi OS is a Linux OS based on Debian. As with all Linux distributions there are 1000's of free Open Source programs that can be downloaded from a Terminal Screen or a Desktop app. This section list the 1000's of programs that can be downloaded for the current version of Raspberry Pi OS, Buster version 10 and the previouse version, Stretch.

Electronics Packages

raspberry Electronics Related Packages

To install Raspberry Pi OS software on a Raspberry Pi

Packages are installed using Terminal. First get an updated package list by entering the following command in to terminal if this has not been done today sudo apt update
Then install your chosen package with the command sudo apt install package name Find out more with the Guide to installing software with the apt command

WWW: Please Note: each listing has a www link to a related webpage, the links are supplied by the author. I can not guarantee thay are all active and related to the listed package.

Distro Version:

The latest Distro for Raspberry Pi OS is Bullseye, the previouse version was Buster. Next to each package is the version available for each distro.

Bullseye(#) = Raspberry Pi OS Bullseye
Buster(#) = Raspberry Pi OS Buster
Bullseye & Buster(#) = same version for both.
If only one Distro is listed then the package is only available on that distribution.

Jump to section A B C D E F G H I K L M N O P Q R S T U V W X Y

ELECTRONICS

Last Updated: 27 August, 2023

  • Back to top

  • A

  • altos

    Bullseye:(1.9.6-1) Buster:(1.9-3) Altus Metrum firmware and utilities www

  • arachne-pnr

    Bullseye:(0.1+20190728gitc40fb22-2) Buster:(0.1+20180909git840bdfd-1+b2) Place and route tool for iCE40 family FPGAs www

  • arachne-pnr-chipdb

    Bullseye:(0.1+20190728gitc40fb22-2) Buster:(0.1+20180909git840bdfd-1) Chip db files for arachne-pnr www

  • arduino

    Bullseye:(2:1.8.13+dfsg1-2) Buster:(2:1.0.5+dfsg2-4.1) AVR development board IDE from Arduino CC www

  • arduino-builder

    Bullseye:(1.3.25-2) Buster:(1.3.25-1) Command line tool for compiling Arduino sketches www

  • arduino-mighty-1284p

    Bullseye:(1-5) Buster:(1-3) Platform files for Arduino to run on ATmega1284P www

  • arduino-mk

    Bullseye:(1.5.2-2.1) Buster:(1.5.2-1) Program your Arduino from the command line www

  • atlc

    Bullseye:(4.6.1-5) Buster:(4.6.1-2) Arbitrary Transmission Line Calculator

  • atlc-examples

    Bullseye:(4.6.1-5) Buster:(4.6.1-2) Examples for Arbitrary Transmission Line Calculator

  • avarice

    Bullseye:(2.14-1) Buster:(2.13+svn375-1) use GDB with Atmel AVR debuggers www

  • avra

    Bullseye & Buster:(1.3.0-3) assembler for Atmel AVR microcontrollers www

  • avrdude

    Bullseye:(6.3-20171130+svn1429-2+b1) Buster:(6.3-20171130+svn1429-2) software for programming Atmel AVR microcontrollers www

  • avrp

    Bullseye & Buster:(1.0beta3-7) Programmer for Atmel AVR microcontrollers www
  • Back to top

  • B

  • berkeley-abc

    Bullseye:(1.01+20191006git52a8ebb+dfsg-1) Buster:(1.01+20181130git163bba5+dfsg-1) ABC - A System for Sequential Synthesis and Verification www

  • bossa

    Bullseye:(1.9.1-1) Buster:(1.3~20120408-5.1) Atmel SAM ARM microcontroller flash programming GUI www

  • bossa-cli

    Bullseye:(1.9.1-1) Buster:(1.3~20120408-5.1) Atmel SAM ARM microcontroller flash programming utility www

  • bottlerocket

    Bullseye:(0.05b3-18) Buster:(0.05b3-17) Utility to control X10 Firecracker devices for home automation www
  • Back to top

  • C

  • caneda

    Bullseye & Buster:(0.3.1-1) Electronic Design Automation software focused on easy of use and portability www

  • canmatrix-utils

    Bullseye:(0.9.3~github-1) Buster:(0.6-3) Handle CAN (Controller Area Network) descriptions - cmdline utilities www

  • cc1111

    Bullseye & Buster:(2.9.0-8) C Compiler for TI/Chipcon 8051-based RF SOCs www

  • circuit-macros

    Bullseye:(9.5.0-1) Macros for drawing electric circuits www

  • ckb-next

    Bullseye:(0.4.3+dfsg.1-0.1) driver for Corsair keyboards and mice www

  • confluence

    Bullseye & Buster:(0.10.6-7+b1) language for synchronous reactive hardware system design www

  • covered

    Bullseye:(0.7.10-3.1) Buster:(0.7.10-3) Verilog code coverage analysis tool www

  • cycfx2prog

    Bullseye:(0.47-1.1) Buster:(0.47-1) Cypress EZ-USB FX2 (LP) programmer www
  • Back to top

  • D

  • dfcgen-gtk

    Bullseye:(0.5-1+b1) Buster:(0.4-3) Digital Filter Coefficients Generator (DFCGen) GTK+ www

  • dfu-programmer

    Bullseye & Buster:(0.6.1-1) device firmware update (DFU) based USB programmer for Atmel chips www

  • dfu-util

    Bullseye & Buster:(0.9-1) Device firmware update (DFU) USB programmer www

  • digitemp

    Bullseye & Buster:(3.7.2-1) read temperature sensors in a 1-Wire net www

  • dpic

    Bullseye:(2021.01.01-1) pic-language converter to LaTeX-compatible and other formats www

  • drawtiming

    Bullseye & Buster:(0.7.1-7) tool for documenting hardware designs through timing diagrams www
  • Back to top

  • E

  • electric

    Bullseye:(9.07+dfsg-6) Buster:(9.07+dfsg-5) electrical CAD system www

  • emu8051

    Bullseye:(2.0.1-2+b1) Buster:(1.1.1-1) Emulator and simulator for 8051 microcontrollers www

  • esptool

    Bullseye:(2.8+dfsg-1) Buster:(2.5.1+dfsg-3) create and flash firmware files to ESP8266 and ESP32 chips www
  • Back to top

  • F

  • flashrom

    Bullseye:(1.2-5) Buster:(1.0-1) Identify, read, write, erase, and verify BIOS/ROM/flash chips www

  • flexloader

    Bullseye & Buster:(0.03-3) utility to configure SRAM based ALTERA devices www

  • fped

    Bullseye:(0.1+201210-1.2+b1) Buster:(0.1+201210-1.1) Footprint editor www

  • fpga-icestorm

    Bullseye:(0~20190913git0ec00d8-2) Buster:(0~20181109git9671b76-1) Tools to handle the bitstream format of Lattice iCE40 FPGAs www

  • fpga-icestorm-chipdb

    Bullseye:(0~20190913git0ec00d8-2) Buster:(0~20181109git9671b76-1) Chip database files for fpga-icestorm www

  • fritzing

    Bullseye:(0.9.3b+dfsg-10+b2) Buster:(0.9.3b+dfsg-9) Easy-to-use electronic design software www

  • fritzing-data

    Bullseye:(0.9.3b+dfsg-10) Buster:(0.9.3b+dfsg-9) Easy-to-use electronic design software (data files) www

  • fritzing-parts

    Bullseye:(0.9.3b-4) Buster:(0.9.3b-3) Easy-to-use electronic design software (parts files) www
  • Back to top

  • G

  • gerbv

    Bullseye:(2.7.0-2+deb11u2) Buster:(2.7.0-1+deb10u2) Gerber file viewer (only RS 274 X format) www

  • ghdl

    Bullseye:(1.0.0+dfsg-3) Buster:(0.35+git20181129+dfsg-3) VHDL compiler/simulator www

  • ghdl-common

    Bullseye:(1.0.0+dfsg-3) VHDL compiler/simulator (common files) www

  • ghdl-gcc

    Bullseye:(1.0.0+dfsg-3) Buster:(0.35+git20181129+dfsg-3) VHDL compiler/simulator (GCC backend) www

  • ghdl-llvm

    Bullseye:(1.0.0+dfsg-3) Buster:(0.35+git20181129+dfsg-3) VHDL compiler/simulator (LLVM backend) www

  • glogic

    Bullseye:(2.6-5) Buster:(2.6-4) graphical logic circuit simulator www

  • gnucap

    Bullseye:(1:0.36~20171003-1.1) Buster:(1:0.36~20171003-1) GNU Circuit Analysis package, main executable www

  • gnucap-common

    Bullseye:(1:0.36~20171003-1.1) Buster:(1:0.36~20171003-1) GNU Circuit Analysis package, development headers www

  • gnucap-default-plugins0

    Bullseye:(1:0.36~20171003-1.1) Buster:(1:0.36~20171003-1) GNU Circuit Analysis package, default plugins www

  • gnucap-python

    Bullseye:(0.0.2-1.2+b1) Buster:(0.0.2-1.1) GNU Circuit Analysis package, Python command plugin www

  • gnusim8085

    Bullseye & Buster:(1.4.1-1) Graphical Intel 8085 simulator, assembler and debugger www

  • gpsim

    Bullseye:(0.31.0-2+b1) Buster:(0.30.0-1) Simulator for Microchip's PIC microcontrollers

  • gputils

    Bullseye:(1.4.0-0.2) Buster:(1.4.0-0.1) GNU PIC utilities www

  • gputils-common

    Bullseye:(1.4.0-0.2) Buster:(1.4.0-0.1) headers and linker scripts for gputils www

  • graywolf

    Bullseye:(0.1.6-4) Buster:(0.1.6-1) Placement for digital VLSI design www

  • gtkwave

    Bullseye:(3.3.104-2+b1) Buster:(3.3.98-1) VCD (Value Change Dump) file waveform viewer www

  • gwave

    Bullseye:(20190116-2+b3) Buster:(20170109-1) waveform viewer eg for spice simulators www
  • Back to top

  • H

  • horizon-eda

    Bullseye:(1.4.0-1) Buster:(0.20181108-1+b1) EDA layout and schematic application www
  • Back to top

  • I

  • imx-code-signing-tool

    Bullseye:(3.3.0+dfsg2-1) code signing tool for i.MX platform

  • imx-usb-loader

    Bullseye:(0~git20200517.30b43d69-1) Buster:(0~git20181105.4aa98090-1) imx_loader - i.MX/Vybrid recovery utility www

  • irsim

    Bullseye:(9.7.104-1) Buster:(9.7.101-1) Switch-level simulator www

  • iverilog

    Bullseye:(11.0-1) Buster:(10.2-1.1) Icarus verilog compiler www
  • Back to top

  • K

  • kicad

    Bullseye:(5.1.9+dfsg1-1+deb11u1) Buster:(5.0.2+dfsg1-1+deb10u1) Electronic schematic and PCB design software www

  • kicad-demos

    Bullseye:(5.1.9+dfsg1-1+deb11u1) Buster:(5.0.2+dfsg1-1+deb10u1) Demo projects for kicad www

  • kicad-doc-de

    Bullseye:(5.1.9+dfsg1-1+deb11u1) Buster:(5.0.2+dfsg1-1+deb10u1) Kicad help files (German) www

  • kicad-doc-en

    Bullseye:(5.1.9+dfsg1-1+deb11u1) Buster:(5.0.2+dfsg1-1+deb10u1) Kicad help files (English) www

  • kicad-doc-es

    Bullseye:(5.1.9+dfsg1-1+deb11u1) Buster:(5.0.2+dfsg1-1+deb10u1) Kicad help files (Spanish) www

  • kicad-doc-fr

    Bullseye:(5.1.9+dfsg1-1+deb11u1) Buster:(5.0.2+dfsg1-1+deb10u1) Kicad help files (French) www

  • kicad-doc-ja

    Bullseye:(5.1.9+dfsg1-1+deb11u1) Buster:(5.0.2+dfsg1-1+deb10u1) Kicad help files (Japanese) www

  • kicad-footprints

    Bullseye:(5.1.7-1) Buster:(5.0.2-1) Footprint symbols for KiCad's Pcbnew www

  • kicad-packages3d

    Bullseye:(5.1.7-1) Buster:(5.0.2-1) 3D models for 3D viewer in KiCad's Pcbnew and Footprint Editor www

  • kicad-symbols

    Bullseye:(5.1.9-1) Buster:(5.0.2-1) Schematic symbols for KiCad's Eeschema www

  • kicad-templates

    Bullseye:(5.1.7-1) Buster:(5.0.2-1) Project templates for KiCad www

  • klayout

    Bullseye:(0.26.2-3) High Performance Layout Viewer and Editor www
  • Back to top

  • L

  • langford-utils

    Bullseye:(0.0.20130228-6.1) Buster:(0.0.20130228-6) Control programs for the Per Vices Noctar IQ demodulator board www

  • lepton-eda

    Bullseye:(1.9.13-4) Buster:(1.9.7-2) Lepton Electronic Design Automation (metapackage) www

  • libnxt

    Bullseye:(0.3-9.1) Buster:(0.3-9) utility library for talking to the LEGO Mindstorms NXT brick www

  • librnd-dev

    Bullseye:(2.3.1-1) pcb-rnd library, headers. www

  • librnd2

    Bullseye:(2.3.1-1) pcb-rnd library, binaries. www

  • listserialportsc

    Bullseye & Buster:(1.4.0-1) list serial ports www

  • lpctools

    Bullseye & Buster:(1.07-1) interface to NXP LPC Microcontrollers ISP serial interface www
  • Back to top

  • M

  • m16c-flash

    Bullseye & Buster:(0.1-1.1) Flash programmer for Renesas M16C and R8C microcontrollers

  • magic

    Bullseye:(8.3.105+ds.1-1) Buster:(8.1.223+ds.1-1) VLSI layout tool www

  • mcu8051ide

    Bullseye:(1.4.9-2) Buster:(1.4.9-1) Graphical Integrated Development Environment for 8051 www

  • mspdebug

    Bullseye:(0.22-2+b2) Buster:(0.22-2+b1) debugging tool for MSP430 microcontrollers www

  • myhdl-cosimulation

    Bullseye:(0.11-1) Buster:(0.10-2) MyHDL cosimulation files www
  • Back to top

  • N

  • nbc

    Bullseye & Buster:(1.2.1.r4+dfsg-9) C compiler for LEGO Mindstorms NXT bricks www

  • netgen-lvs

    Bullseye:(1.5.133-1+b2) Buster:(1.5.118-1) Netlist comparison - Layout vs Schematic (LVS) www

  • ngspice

    Bullseye:(34+ds-1) Buster:(30.2-1) Spice circuit simulator www

  • nitpic

    Bullseye:(0.1-17) Buster:(0.1-16) simulator for the Microchip PIC16C84 microcontroller

  • nxt-firmware

    Bullseye & Buster:(1.29-20120908+dfsg-7) Improved firmware for LEGO Mindstorms NXT bricks www
  • Back to top

  • O

  • ola

    Bullseye:(0.10.8.nojsmin-2) Buster:(0.10.7.nojsmin-1+b1) Open Lighting Architecture www

  • opensta

    Bullseye:(0~20191111gitc018cb2+dfsg-1) Gate-level Static Timing Analyzer www

  • oregano

    Bullseye & Buster:(0.84.41+dfsg.1-1) tool for schematical capture of electronic circuits www

  • ow-shell

    Bullseye:(3.2p4+dfsg1-4+b1) Buster:(3.2p3+dfsg1-2+deb10u1) shell utilities to talk to an 1-Wire owserver www

  • ow-tools

    Bullseye:(3.2p4+dfsg1-4) Buster:(3.2p3+dfsg1-2+deb10u1) tools to monitor or inspect a ow-server link www

  • owfs

    Bullseye:(3.2p4+dfsg1-4) Buster:(3.2p3+dfsg1-2+deb10u1) Dallas 1-wire support www

  • owfs-common

    Bullseye:(3.2p4+dfsg1-4) Buster:(3.2p3+dfsg1-2+deb10u1) common files used by any of the OWFS programs www

  • owfs-fuse

    Bullseye:(3.2p4+dfsg1-4+b1) Buster:(3.2p3+dfsg1-2+deb10u1) 1-Wire filesystem www

  • owftpd

    Bullseye:(3.2p4+dfsg1-4+b1) Buster:(3.2p3+dfsg1-2+deb10u1) FTP daemon providing access to 1-Wire networks www

  • owhttpd

    Bullseye:(3.2p4+dfsg1-4+b1) Buster:(3.2p3+dfsg1-2+deb10u1) HTTP daemon providing access to 1-Wire networks www

  • owserver

    Bullseye:(3.2p4+dfsg1-4+b1) Buster:(3.2p3+dfsg1-2+deb10u1) Backend server for 1-Wire control www
  • Back to top

  • P

  • pcb

    Bullseye:(1:4.2.2-1) Buster:(1:4.2.0-2) printed circuit board (pcb) design program - metapackage www

  • pcb-common

    Bullseye:(1:4.2.2-1) Buster:(1:4.2.0-2) printed circuit board (pcb) design program - common files www

  • pcb-gtk

    Bullseye:(1:4.2.2-1) Buster:(1:4.2.0-2) printed circuit board (pcb) design program - GTK+ interface www

  • pcb-lesstif

    Bullseye:(1:4.2.2-1) Buster:(1:4.2.0-2) printed circuit board (pcb) design program - LessTif interface www

  • pcb-rnd

    Bullseye:(2.3.1-1) Buster:(2.1.1-1) Standard installation of pcb-rnd www

  • pcb-rnd-auto

    Bullseye:(2.3.1-1) Autoroute and autoplace. www

  • pcb-rnd-cloud

    Bullseye:(2.3.1-1) Networking plugins. www

  • pcb-rnd-core

    Bullseye:(2.3.1-1) pcb-rnd executable with the core functionality www

  • pcb-rnd-debug

    Bullseye:(2.3.1-1) Debug and diagnostics. www

  • pcb-rnd-doc

    Bullseye:(2.3.1-1) Documentation for pcb-rnd www

  • pcb-rnd-export

    Bullseye:(2.3.1-1) Common export plugins. www

  • pcb-rnd-export-extra

    Bullseye:(2.3.1-1) Export formats: special/extra www

  • pcb-rnd-export-sim

    Bullseye:(2.3.1-1) Export plugins to simulators www

  • pcb-rnd-extra

    Bullseye:(2.3.1-1) Extra action commands and optional functionality. www

  • pcb-rnd-hid-gtk2-gdk

    Bullseye:(2.3.1-1) GUI: gtk2, software render www

  • pcb-rnd-hid-gtk2-gl

    Bullseye:(2.3.1-1) GUI: gtk2, opengl www

  • pcb-rnd-hid-lesstif

    Bullseye:(2.3.1-1) GUI: motif/lesstif, software render www

  • pcb-rnd-import-geo

    Bullseye:(2.3.1-1) Geometry import plugins. www

  • pcb-rnd-import-net

    Bullseye:(2.3.1-1) Netlist/schematics import plugins. www

  • pcb-rnd-io-alien

    Bullseye:(2.3.1-1) File format compatibility with other PCB layout designers. www

  • pcb-rnd-io-standard

    Bullseye:(2.3.1-1) Commonly used non-native board and footprint file formats www

  • pcb-rnd-lib-gl

    Bullseye:(2.3.1-1) Support library for rendering with opengl. www

  • pcb-rnd-lib-gtk

    Bullseye:(2.3.1-1) Support library for building the GUI with gtk. www

  • pcb-rnd-lib-gui

    Bullseye:(2.3.1-1) Support library for building the GUI. www

  • pcb-rnd-lib-io

    Bullseye:(2.3.1-1) Support library for alien file formats. www

  • pcb2gcode

    Bullseye:(1.1.4-git20120902-1.1+b2) Buster:(1.1.4-git20120902-1.1+b1) command-line tool for engraving PCBs using CNCs www

  • pd-pduino

    Bullseye:(0.7-2) Buster:(0.5.1-2) interfacing with the Arduino from within Pure Data (Pd) www

  • pd-xbee

    Bullseye:(0.1~svn17666-1+b1) Buster:(0.1~svn17647-3) interfacing with your XBee from within Pure Data (Pd) www

  • picprog

    Bullseye & Buster:(1.9.1-4) Microchip PIC serial programmer software www

  • platformio

    Bullseye:(4.3.4-1) open source ecosystem for IoT development www

  • pulseview

    Bullseye:(0.4.2-2) Buster:(0.4.1-1) sigrok logic analyzer, oscilloscope, and MSO GUI www

  • pycirkuit

    Bullseye:(0.5.1-1) front-end for "Circuit Macros" and the PIC language www
  • Back to top

  • Q

  • qelectrotech

    Bullseye:(1:0.7.0-1) Buster:(1:0.6.1-1) Electric schematic editor www

  • qelectrotech-data

    Bullseye:(1:0.7.0-1) Buster:(1:0.6.1-1) symbols needed for qelectrotech www

  • qelectrotech-examples

    Bullseye:(1:0.7.0-1) Buster:(1:0.6.1-1) examples files for qelectrotech www

  • qflow

    Bullseye:(1.3.17+dfsg.1-2) Buster:(1.1.121+dfsg.1-2) Open-Source Digital Synthesis Flow www

  • qflow-tech-osu018

    Bullseye:(1.3.17+dfsg.1-2) Buster:(1.1.121+dfsg.1-2) Technology files needed for qflow for osu018 www

  • qflow-tech-osu035

    Bullseye:(1.3.17+dfsg.1-2) Buster:(1.1.121+dfsg.1-2) Technology files needed for qflow for osu035 www

  • qflow-tech-osu050

    Bullseye:(1.3.17+dfsg.1-2) Buster:(1.1.121+dfsg.1-2) Technology files needed for qflow for osu050 www

  • qrouter

    Bullseye:(1.4.71-2) Buster:(1.3.108-1) Multi-level, over-the-cell maze router www
  • Back to top

  • R

  • rfdump

    Bullseye:(1.6-8) Buster:(1.6-6) tool to decode RFID tag data www
  • Back to top

  • S

  • s51dude

    Bullseye & Buster:(0.3.1-1.1) In-System Programmer for 8051 MCUs using usbtiny www

  • scantool

    Bullseye:(2.1-2.1) Buster:(1.21+dfsg-7) OBD-II vehicle diagnostic scanner www

  • sdcc

    Bullseye:(4.0.0+dfsg-2) Buster:(3.8.0+dfsg-2) Small Device C Compiler www

  • sdcc-libraries

    Bullseye:(4.0.0+dfsg-2) Buster:(3.8.0+dfsg-2) Small Device C Compiler (libraries) www

  • sdcc-ucsim

    Bullseye:(4.0.0+dfsg-2) Buster:(3.8.0+dfsg-2) Micro-controller simulator for SDCC www

  • sigrok

    Bullseye:(0.2-5) Buster:(0.2-4) Logic analyzer and protocol decoder software suite (metapackage) www

  • sigrok-cli

    Bullseye & Buster:(0.7.1-1) command-line frontend for the sigrok software www

  • sigrok-firmware-fx2lafw

    Bullseye:(0.1.7-1) Buster:(0.1.6-1) Firmware for Cypress FX2(LP) based logic analyzers www

  • simavr

    Bullseye:(1.6+dfsg-3) Buster:(1.6+dfsg-1) lean and mean AVR simulator www

  • simulavr

    Bullseye:(1.0.0+git20160221.e53413b-2) Buster:(1.0.0+git20160221.e53413b-1) Atmel AVR simulator www

  • simulide

    Bullseye & Buster:(0.1.7+dfsg-2) simple real time electronic circuit simulator www

  • simulpic

    Bullseye & Buster:(1:2005-1-28-10) simulator for Microchip PIC16F84 microcontroller

  • spectools

    Bullseye:(201601r1-1+b1) Buster:(201601r1-1) Utilities for using the Wi-Spy USB spectrum analyzer hardware www

  • spim

    Bullseye & Buster:(8.0+dfsg-6.1) MIPS R2000/R3000 emulator www

  • stlink-gui

    Bullseye:(1.6.1+ds-3) Buster:(1.5.1+ds-1) OpenSource ST-Link tools replacement. www

  • stlink-tools

    Bullseye:(1.6.1+ds-3) Buster:(1.5.1+ds-1) OpenSource ST-Link tools replacement. www

  • stm32flash

    Bullseye:(0.5+git20200914+2b0f078-1) Buster:(0.5-1) STM32 chip flashing utility using a serial bootloader www
  • Back to top

  • T

  • t2n

    Bullseye & Buster:(0.6-6) Simple command-line tool for LEGO Mindstorms NXT www

  • tkgate

    Bullseye:(2.1+repack-4) Buster:(2.1+repack-3) Tcl/Tk based digital circuit editor and simulator www

  • tkgate-data

    Bullseye:(2.1+repack-4) Buster:(2.1+repack-3) Tcl/Tk based digital circuit editor and simulator - data files www
  • Back to top

  • U

  • uhubctl

    Bullseye:(2.3.0-1) Buster:(2.0.0-5) USB hub per-port power control www

  • uisp

    Bullseye:(20050207-4.3) Buster:(20050207-4.2) Micro In-System Programmer for Atmel's AVR MCUs www

  • usbrelay

    Bullseye:(0.4-2) Buster:(0.4-1) USB HID relay driver www
  • Back to top

  • V

  • verilator

    Bullseye:(4.038-1) Buster:(4.010-1) fast free Verilog simulator www

  • veroroute

    Bullseye:(2.06-1) Veroboard, Perfboard, and PCB layout and routing application www

  • veroroute-data

    Bullseye:(2.06-1) Veroboard, Perfboard, and PCB layout and routing application (data package) www

  • vish

    Bullseye & Buster:(0.0.20130812-1) Commandline interface for Virtual Instrument Software Architecture www

  • visolate

    Bullseye & Buster:(2.1.6~svn8+dfsg1-1.1) tool for engraving PCBs using CNCs www
  • Back to top

  • W

  • w1retap

    Bullseye:(1.4.4-4) Buster:(1.4.4-3+b5) Data logger for 1-Wire weather sensors www

  • w1retap-mongo

    Bullseye:(1.4.4-4) Buster:(1.4.4-3+b5) Data logger for 1-Wire weather sensors (MongoDB plugin) www

  • w1retap-mysql

    Bullseye:(1.4.4-4) Buster:(1.4.4-3+b5) Data logger for 1-Wire weather sensors (MySQL plugin) www

  • w1retap-odbc

    Bullseye:(1.4.4-4) Buster:(1.4.4-3+b5) Data logger for 1-Wire weather sensors (ODBC plugin) www

  • w1retap-pgsql

    Bullseye:(1.4.4-4) Buster:(1.4.4-3+b5) Data logger for 1-Wire weather sensors (PostgreSQL plugin) www

  • w1retap-sqlite

    Bullseye:(1.4.4-4) Buster:(1.4.4-3+b5) Data logger for 1-Wire weather sensors (SQLite plugin) www
  • Back to top

  • X

  • xc3sprog

    Bullseye:(0+svn795+dfsg-3) Buster:(0+svn795+dfsg-1) JTAG flashing tool for FPGAs, CPLDs and EEPROMs www

  • xcircuit

    Bullseye & Buster:(3.9.73+dfsg.1-1) Draw circuit schematics or almost anything www

  • xschem

    Bullseye:(2.8.1-3) Buster:(2.8.1-2) schematic capture program www
  • Back to top

  • Y

  • yosys

    Bullseye:(0.9-1+b2) Buster:(0.8-1+b1) Framework for Verilog RTL synthesis www

  • yosys-dev

    Bullseye:(0.9-1+b2) Buster:(0.8-1+b1) Framework for Verilog RTL synthesis (development files) www

Packages Types